中文

Rearview

  Many reasons for the cars starting jitter

Clutch failure-buffeting start shaking, not necessarily clutch internal damage

 1. Often due to the installation of mismatched type of driven disc assembly, 2. by the repairman touch the grease left on the driven disc, 3. engine transmission bearing wear and engine installation is not strong and caused by, 4, drive shaft universal joint wear gap is too large When the vehicle starts to shake, we should carry out the following check: whether the clutch driven disc model used matches the car, please pay attention to the engine, the variable. Wear condition of transmission system and adjusting installation correctly separating system 2 engine support system 3 engine output system 4 transmission system with a little oil or grease on the surface。

Reason:
1. Engine crankshaft rear oil seal or variable transmission shaft oil seal damage transmission input shaft sleeve or separation bearing guide bearings caused by excessive lubrication:
There is a small amount of oil or grease on the follower plate. Friction coefficient will significantly reduce and affect the normal combination of the clutch, resulting in a sudden setback of the vehicle.
Damage of spline shaft
Reason:
1 the transmission output shaft is naturally worn out as a step.
2. transmission input shaft and clutch spline teeth.
The driven plate can not slide freely on the transmission input shaft.
Shell deformation
Reason:
Failure to install the fixing bolts according to the Kant clutch specifications without alternating tightening of the cross causes failure to pay attention to the alignment of the pressure plate cover on the flywheel:
The deformation of the pressure plate lid can only be raised on one side.

  solution two

In driving, the position and Angle of the rearview mirror will change easily due to the vibration of the vehicle. Therefore, owners should pay attention to the observation and timely adjustment.Although everyone has different driving habits, there are fixed rules for adjusting the rearview mirror.Now, many manufacturers are on the car rearview mirror increase technical elements, such as rearview mirror defogging defrosting function, washing function, the car rearview mirror LCD technology and concept car rear view of photography.But for most cars, the most important thing about the rearview mirror is its most basic function.Though now all kinds of advanced equipped with makes the car more intelligent, more secure, but in the rearview mirror, no matter whether the obstacles, no matter whether can increase the driving resistance, less without a car.





  solution one

In driving, the position and Angle of the rearview mirror will change easily due to the vibration of the vehicle. Therefore, owners should pay attention to the observation and timely adjustment.Although everyone has different driving habits, there are fixed rules for adjusting the rearview mirror.Now, many manufacturers are on the car rearview mirror increase technical elements, such as rearview mirror defogging defrosting function, washing function, the car rearview mirror LCD technology and concept car rear view of photography.But for most cars, the most important thing about the rearview mirror is its most basic function.Though now all kinds of advanced equipped with makes the car more intelligent, more secure, but in the rearview mirror, no matter whether the obstacles, no matter whether can increase the driving resistance, less without a car.




Customer Service

×
Wonderful:
service:
Hong:
service1: